ProjectHome Assistant with Raspberry Pi 4 completed
Home Assistant with Raspberry Pi 4 completed: I had a Raspberry Pi 4 sitting idle at home. Previously, I only used it for Pi‑hole ad‑blocking. This t…
Technical builds, experiments, proof-of-concepts, and engineering notes.
ProjectHome Assistant with Raspberry Pi 4 completed: I had a Raspberry Pi 4 sitting idle at home. Previously, I only used it for Pi‑hole ad‑blocking. This t…
ProjectUsing Rasperry PI as home assistant: I had a Raspberry Pi 4 sitting idle at home. Previously, I used it to run Pi hole for blocking ads across the ne…
ProjectNew version of water self watering system Part 1: During this summer I’ve been working on a small IoT project. The goal is an automatic self watering…
ProjectProject Cat Feeder Part 1: When I’m not home, my cats still need food. I started a new project and explored a few concepts to find a design I like. •…
ProjectCat Feeder Part 2: 🎨 Design rethink After living with the first design a bit, I didn’t like the look — it felt like a mix of a wasp and some other b…
ProjectArduino Watering project Distanse module: Measure the water level in a barrel using an ultrasonic distance sensor and indicate the level on an LCD. •…
ProjectMade a draft of the finished code for this project: 🔩📦 Hardware Assembly & Pin Budget — Draft Control Logic 🧰 Assembly notes I’ve been assembling…
ProjectFinally project is up and running: 🚚 Finally! Finally my water hose has arrived — I had to wait a long time to be able to continue. • IoT • pcb, lcd
ProjectCompleted the water tank also rewired: 🔔 LED panel linked to relays I built a new LED component where each LED tracks its relay while the pump is ac…
ProjectArduino Watering project Relays: 🗂️ Purpose Each relay controls a water pump (ON/OFF). I built a quick mapping table to keep the channels straight.…
ProjectBuilt a relay table to organize the pumps for my automated watering system. Started wiring everything, but with only a fraction connected it already…
ProjectArduino Watering project Build the heart of my system: 🧭 Direction After a few weeks on this project I now have a clearer idea of how I want to shap…